Copyright Extra Vegetables LTD. All rights reserved.CoolMasterCoolLink (No Schedule) - FREECoolLink (No Schedule)Extra Vegetables10/25/2010 13:3009/10/2014 12:00800lua_genDriverWorks
Copyright Extra Vegetables LTD. All rights reserved.
8.0.0
EXTRA VEGETABLES DRIVER FOR COOLINK
This driver enables a Coolink unit to be represented on Control4 UI as a thermostat and does not include scheduling capabilities.
----------------------------------
BRIEF INSTRUCTIONS
- Make the connection to the Serial port to which the CoolLink is connected.
- Set the TEMPERATURE end point connection to this driver for the room in which it is reporting.
- Set the TEMPERATURE_CONTROL end point connection to this driver for the room in which it is controlling.
- Refresh the Navigators
----------------------------------
FULL INSTRUCTIONS
Full instructions for this driver are included in the download package. You can download the instructions by logging into the Extra Vegetables website at www.extravegetables.com and downloading the driver package.
----------------------------------
SUPPORT
For support on this driver please contact Control4 technical support or your local Control4 distributor.
----------------------------------
AUTO UPDATE
This driver supports Auto Update. To enable this feature select Automatic Updates to 'On'.
----------------------------------
CHANGELOG
8.0.0 Sep 10 2014
Activation key removed
7.1.5 - 20 June 2014
Enables the selection of . or , as the local decimal separator. This MUST be set to the correct character for your controllers locale.
7.1.4 - 18 December 2013
Corrects an issue in determing the expected temperatures at a time point in a schedule.
7.1.1 - 6 November 2013
Corrects an issue where the locale decimal separator is ,
7.1.0
Driver now follows Cooling schedule in Cooling Mode. Can now choose which schedule to follow in Auto mode. Coolmaster only has single set point ability. When moving between modes system will adopt scheduled temperature for the mode selected.
7.0.9 23 July 2013
Resolves issue with scale changes not being honored
7.0.8 12 July 2013
Adds persist data and hold mode support
Resolves issue with fan speed from fan mode UI not working
7.0.7 15 May 2013
Enables hold modes in driver.
Will set CoolLink to previously saved values on system reboot.
7.0.6 29 April 2013
Compatible with changed isEnabled notification in OS 2.4
7.0.5 18 March 2013
Makes compatible with new firmware in units that are not providing scale information with airt temperature reading. Backwards compatible.
7.0.4 1 February 2012
Enables Low, Medium, High and Auto fan modes from the Control4 UI
On/Top fan speed can still only be set from programming as Control4 does not allow us to enable all of the fan modes on the UI.
NOTE: You need to restart the controller after an Auto Update in order to enable this feature!
7.0.3 January 23 2013
Adds a little extra to command delay, prevents issues when being used with Thermostat Combiner on new faster controllers.
7.0.2 November 7 2012
Resolves issue with setpoint return on scheduled events when entering HEAT/COOL/AUTO mode.
7.0.1 November 7 2012
Enables scheduling support
7.0.0
Supports Auto Update.
Driver Version
STRING
true
Automatic Updates
LIST
- Off
- On
Off
false
Control4 MAC Address
STRING
false
Driver Information
STRING
true
Debug Mode
LIST
- Off
- On
Off
false
CoolLink Firmware
STRING
true
Decimal Separator
LIST
- .
- ,
.
false
Get Firmware Version
Get Firmware Version
Send C4 settings to zone
Send
Set to FAN mode
Set CoolLink NAME to FAN mode
Set to DRY mode
Set CoolLink NAME to DRY mode
Set Fan Speed
Set Fan Speed on NAME to PARAM1
Speed
LIST
- Low
- Medium
- High
- Auto
- Top
control4_thermostat_proxy
1
1
Serial RS-232
True
True
RS_232
5001
6
THERMOSTAT
2
False
False
False
False
THERMOSTAT
7000
6
Room Selection
7
False
False
False
False
False
TEMPERATURE
False
TEMPERATURE_CONTROL
True
True
False
False
41
95
41
95
50
350
50
350
False
Off,Heat,Cool
Auto,High,Medium,Low
Off,Heat,Cool
False
False
False
False
False
True
False
False
False
9600 8 none 1 none