Copyright 2015 Control4 Corporation. All Rights Reserved.iLightIP Controller - FREEIP ControllerControl405/12/2011 10:3009/13/2016 12:00806lua_genDriverWorkstrue8002.9.0
Copyright 2015 Control4 Corporation. All Rights Reserved.
8.0.6
CONTROL4 DRIVER FOR ILIGHT LIGHTING OVER IP
This is the master driver to enable iLight to integrate with Control4 over the iLight IP interface.
This driver also enables you to send specific commands to the iLight system.
----------------------------------
BRIEF INSTRUCTIONS
- Set the IP interface to a static IP address or ensure it always receives the same IP address from the DHCP server via a MAC based reservation.
- Enter the IP address of the IP Interface into the Properties tab
- Add and configure the iLight elements for lighting, blinds and relays.
----------------------------------
FULL INSTRUCTIONS
Full instructions for this driver are available on the Control4 dealer portal.
----------------------------------
SUPPORT
For support on this driver please contact Control4 technical support or your local Control4 distributor.
----------------------------------
AUTO UPDATE
This driver supports Auto Update. To enable this feature select Automatic Updates to 'On' on the Properties page.
----------------------------------
CHANGELOG
8.0.0 Sep 10 2014
Activation key removed
7.0.3 - 18 June 2014
Supports Advanced Lighting Scene tracking
7.0.1 - 21 November 2012
Improves sequencing of commands when multiple changes are sent to the iLight network.
7.0.0 - 8 October 2012
Supports Auto Update.
IP version officially launched.
5.0.6 - 20 July 2012
Fixed an issue which could cause ramps to go in the wrong direction. Often reported by customers as having to press a key twice in order to control the lights. Increased queue size for larger projects.
5.0.5 - 21 December 2011
Adds better support for activation/checking on controllers that may have unreliable internet connection.
5.0.1 - 8 November 2011
Fixed issue with queue timing out on some commands, resulting in delayed popcorn effect.
5.0.0 - 7 October 2011
Version REQUIRED for new licensing system. No other changes from previous version.
1.0.1 - 20 July 2011
Resolved problem where Scene/Area driver lost its settings after a controller reboot or Director restart. Only the Scene/Area driver has been changed. All version numbers incremented for consistency.
1.0.0 - 12 May 2011
Initial release.
Driver Version
STRING
true
Automatic Updates
LIST
- Off
- On
Off
false
Control4 MAC Address
STRING
false
Driver Information
STRING
true
Debug Mode
LIST
- Off
- On
Off
false
IP Address
STRING
false
Send Command
Send Command PARAM1 to System Integrator in NAME
Serial Command
STRING
Clear Message
Clear Message from SI-2
ExtraVeg_iLight_IP_Controller
2
6
iLight Keypads
1
False
False
False
True
iLight_KEYPAD
True
3
6
iLight Circuits
1
False
False
False
True
iLight_CIRCUIT
True