Copyright 2014 Control4 Corporation. All Rights Reserved.VancoHDMI 8x8V [Serial]HDMI 8x8VControl411/22/2012 10:3011/25/2014 12:00102lua_genDriverWorks
Copyright 2014 Control4 Corporation. All Rights Reserved.
1.0.2
CONTROL4 DRIVER FOR VANCO 8x8 HDMI MATRIX
Driver for Vanco HDMI switches
Driver will poll for status every 2 minutes.
----------------------------------
BRIEF INSTRUCTIONS
1. Set up switch and check operation
2. Ensure Serial port is set to 9600 8 None 1
3. Connect to Control4 controller with straight through serial cable
4. Make Input and Output Connections
5. Make serial binding in Composer Connections
6. Use the Action tab to print out of current switch status will be shown on the Lua tab if connection is good.
7. If no physical connection is present or is lost then driver will attempt to reconnect every 2 minutes. You can force a reconnection attempt by re-binding the serial connection.
----------------------------------
OPTIONAL PROPERTIES
If Manage Power is set to On then driver will set switch into Standby if all rooms are off. Please remember there will be a boot up delay as the switch comes out of standby. Default (recommended) setting is Off.
If Disconnect on Room Off is set to On then driver will disconnect switch from display device when associated room is off. This can cause HDCP/EDID problems with some screens. Default (recommended) setting is Off.
----------------------------------
LIMITATIONS
Warning: If switch is powered off from front panel then the driver cannot turn it back on!
----------------------------------
SUPPORT
For support on this driver please contact your loacl Control4 support center.
----------------------------------
AUTO UPDATE
This driver supports Auto Update. To enable this feature select Automatic Updates to 'On' on the Properties page.
----------------------------------
CHANGELOG
1.0.2 December 2014
Changes EOL character in serial driver
1.0.1 November 2014
Increased inter-command delay for 8x8 matrix
1.0.0 January 2014
Initial release
Driver Version
STRING
true
Automatic Updates
LIST
- Off
- On
Off
false
Control4 MAC Address
STRING
false
Driver Information
First bind RS-232 connection
STRING
true
Debug Mode
LIST
- Off
- On
Off
false
Manage Power
LIST
- Off
- On
Off
false
Disconnect on Room Off
LIST
- Off
- On
Off
false
DiscreteCodes
Power On
Turn Power On in NAME
Power Off
Turn Power Off in NAME
Update Status
Interrogate
Power On
On
Power Off
Off
avswitch
1
1
RS232
True
True
RS_232
5001
2
AV Switch
False
True
AVSWITCH
2001
5
Output 1
False
True
HDMI
2002
5
Output 2
False
True
HDMI
2003
5
Output 3
False
True
HDMI
2004
5
Output 4
False
True
HDMI
2005
5
Output 5
False
True
HDMI
2006
5
Output 6
False
True
HDMI
2007
5
Output 7
False
True
HDMI
2008
5
Output 8
False
True
HDMI
1001
5
Input 1
True
True
HDMI
1002
5
Input 2
True
True
HDMI
1003
5
Input 3
True
True
HDMI
1004
5
Input 4
True
True
HDMI
1005
5
Input 5
True
True
HDMI
1006
5
Input 6
True
True
HDMI
1007
5
Input 7
True
True
HDMI
1008
5
Input 8
True
True
HDMI
9600 8 none 1 none
0
0
True
True
False
True
False
False
True
8
8
True
True
True