Copyright 2016 Control4. All rights reserved. Somfy Control4 Sonesse Ultra 50 Roller Shade 8/18/2016 9/13/2016 3 True True 1 0 100 True Sonesse Ultra 50 Roller Shade devices_sm/blinds.gif devices_lg/blinds.gif lua_gen DriverWorks Comfort Comfort blind blind 5001 6 Blinds Proxy 2 False False False False BLIND 2 6 Somfy SDN RS485 1 True False False False SOMFY_SDN_RS485 True False Somfy SDN 2.0 RS485 Shade\nThe Somfy shade driver represents an actual shade motor. RELEASE NOTES: This version of the driver only supports single shade control. It does NOT support Somfy configured groups. If you need to have shade groups then please use the Control4 blind group driver. PROPERTIES: Node ID: This is the unique Somfy node id that is associated with each shade motor. This will be autopopulated if you use the "Add Connected Shades" action on the serial driver or you can add it manually. The node id can be found physically on the shade motor or via the Somfy RS485 Setting Tool. Ramp Time (Seconds): This is the total time that it takes for the shade to move from fully open to fully closed. The time will be calculated each time for discrete levels as well as the shade limits. At the end of that time, the shade driver and serial driver will query the shade level from the hardware. If the reported level in the UI is off then try increasing the shade ramp time. The default value is 10 seconds. Debug Mode: This is the list of debug info output options. KNOWN PROBLEMS: According to Somfy, the level reporting from the shade hardware has a tolerance of +/- 2%. So if you send the shade to 50% then it could report back anywhere from to 52% or 48%. Sending the shade to fully opened/closed reports correctly. Node ID STRING unassigned false Ramp Time (Seconds) RANGED_INTEGER false 10 1 1800 Debug Mode LIST Off Print Log Print and Log Off false relay