Certified Copyright 2012 BPL Techno Vision Ltd. All rights reserved. BPL 1 BPL 3/09/2012 11:00 AM 3/09/2012 11:00 AM BPL IQ Dimmer BPL IQ Dimmer light DriverWorks lua_gen light Lights devices_sm/LutronDimmer.gif devices_lg/LutronDimmer.gif 1 EV_ON when NAME turns ON 2 EV_OFF when NAME turns OFF 3 EV_LEVEL when NAME Level changes BPL IQ Dimmer driver Prerequisite: Check for the led on gateway device, to confirm the connection with Control4 system is up. Adding BPL dimmer device Go to System Design, search Device type:Light and Manufacturer:BPL. Configuration On the properties page of the dimmer driver, 1. IEEE : Enter the IEEE number of the device. 2. Load Config : This value is 1 or 2 depending on which load this dimmer device represents. Adding the dimmer device to Network 1. On the Actions page of gateway driver, click on Permit Join button. [This opens a 60 seconds window on the gateway, for devices to join.] 2. Press and hold the Factory switch on the dimmer device for 5 seconds. 3. Click and Hold Ramp Rates could be set. Range: 0 Seconds to 120 Seconds. On successfull join, the properties page of dimmer device will indicate the Network status as "Online". For Technical Support, please contact: Email : Support.BPLIQ@bpl.in Phone : +91 80 32719381 Load Config STRING 2 1 2 false Click Ramp Rate Up RANGED_INTEGER 0 120 0 false Click Ramp Rate Down RANGED_INTEGER 0 120 0 false Hold Ramp Rate Up RANGED_INTEGER 0 120 0 false Hold Ramp Rate Down RANGED_INTEGER 0 120 0 false Set IEEE STRING 301064F4A4374C00 false DB Status STRING Device not present true Network Status STRING Offline true Debug Mode LIST Off Print Log Print and Log Off false True True True False False False False False False False False False False False False False False False True 1 6 BPL IQ Proxy 1 True False False True BPL_PROXY True 5001 6 Light 2 False False False False LIGHT Certified other