CertifiedCopyright 2012 BPL Techno Vision Ltd. All rights reserved.BPL1BPL3/09/2012 11:00 AM3/09/2012 11:00 AMBPL IQ LPG Valve ControllerBPL IQ Valve Controllerbpl_iq_lpgvalvecontrollertrueDriverWorkslua_genothersMotorizationdevices_sm/relaysingle_relay_open.gifdevices_lg/relaysingle_relay_open.gif1Batter LowOn NAME Battery Low1devices_sm\relaysingle_relay_open.gifdevices_lg\relaysingle_relay_open.gif2devices_sm\relaysingle_relay_close.gifdevices_lg\relaysingle_relay_close.gif BPL IQ LPG Valve Controller driver Prerequisite: 1. Check for the led on gateway device, to confirm the connection with Control4 system is up. 2. Add a Generic Relay device driver as proxy Adding BPL LPG Valve Controller device Go to System Design, search Device type:--others-- and Manufacturer:BPL. Configuration On the properties page of the BPL LPG Valve Controller driver, 1. IEEE : Enter the IEEE number of the device. Adding the BPL LPG Valve Controller device to Network 1. On the Actions page of gateway driver, click on Permit Join button. [This opens a 60 seconds window on the gateway, for devices to join.] 2. Press and hold both the button on the device and Power up. Factory reset on the device is indicated by the led flashing rapidly. Now power cycle the device. On successfull join, the properties page of the BPL LPG Valve Controller will indicate the Network status as "Online". And the led on the device will be on. For Technical Support, please contact: Email : Support.BPLIQ@bpl.in Phone : +91 80 32719381 Set IEEESTRING00137A0000005558falseDB StatusSTRINGDevice not presenttrueNetwork StatusSTRINGOfflinetrueDebug ModeLISTOffPrintLogPrint and LogOfffalse16BPL IQ Proxy1TrueFalseFalseTrueBPL_PROXYTrue26Relay1FalseFalseFalseFalseRELAYTrueCertifiedrelay