Copyright 2009 Control4 Corporation. All rights reserved.Sensor Bridge Driver Version 2.0\n\nThis Card Access DriverWorks driver supports the first Card Access Sensor Bridge (ZGB10A) introduced into a project. Additional Sensor Bridges ("Expansion Bridges") added to the project will need to use the Expansion Bridge Driver (ZGB10A-XP).\n\nProperties Page Help:\n- Bridge Status:\n Online or Offline. NOTE: if the Sensor Bridge is offline, all sensors\n will register as offline.\n- Last Check-In:\n Shows the last check-in date and time of the Sensor Bridge.\n- Last Event:\n Shows the date and time of the last sensor event, along with the TxID or name\n of the sensor and the signal level.\n\nNOTE: GE Wireless Sensors do NOT need to be associated in any way with a specific Sensor Bridge, nor are there any bindings that need to be made between bridges.\n\nInsert a paper clip and press the button on the face of the unit four (4) times.BRIDGE 1 STATUSSTRINGtrue> Last Check-In 1STRING--true> Last Event 1STRING--true> Sensor Signal Level 1STRING--trueBRIDGE 2 STATUSSTRINGtrue> Last Check-In 2STRING--true> Last Event 2STRING--true> Sensor Signal Level 2STRING--trueBRIDGE 3 STATUSSTRINGtrue> Last Check-In 3STRING--true> Last Event 3STRING--true> Sensor Signal Level 3STRING--trueBRIDGE 4 STATUSSTRINGtrue> Last Check-In 4STRING--true> Last Event 4STRING--true> Sensor Signal Level 4STRING--trueAlerts (Batt/Supv/Trbl)STRINGtrueDebug ModeLISTOffPrintLogPrint and LogOfffalseCard Access Sensor Bridgedevices_sm/c4modI_16.gifdevices_lg/c4modI_32.giflua_genControllersotherstruecardaccess_sensorbridge_ZGB10ADriverWorks1Battery LowWhen any sensor batteries are Low2Supervisory TimeoutWhen any sensor supervisory signals missed3Sensor TroubleWhen any sensor detects troublec4:cardaccess_inhome:ZGB10A16Sensor Bus1FalseFalseFalseFalseBUS_CAZGBTrue60016ZIGBEE4TrueFalseFalseFalseZIGBEE1006Extension Bridges1FalseFalseFalseFalseBRIDGE_EXTTrueCard Access3Card Access7/20/2009 12:30 PM9/19/2012 02:55 PMZGB10Azigbee