Certified Copyright 2004-2017 CSI All rights reserved. CSI Converging Systems Inc. e_Node 2010 e_node 2010 07/10/2014 11:45 AM 03/29/2017 5:50 PM 3 devices_sm\c4modI_16.gif devices_lg\c4modI_32.gif lua_gen ip DriverWorks CSI:gateway:e_Node 2010 Controllers True others ip_CSI_e_Node_2010 5001 6 CSBus 1 False False False False 485_BUS 6001 6 ENODE 4 True False False False TCP 23 True True True AlwaysOn 0 0 False Control4 certified on 3/31/2017 for software released version: 2.9.1 This is the driver for use with a Converging Systems e-Node 2010 a DMX/IP lighting gateway. It can operate (based on the model) in one of two modes. In DMX Mode it works with 3 or 4 color DMX lighing fixtures and in CSBUS mode it works with Converging Systems Lighing and Motor controllers. The e-node connects to a Control4 director via TCP (TELNET PORT 23) on a local network. There needs to be one instance of this driver for every e-node installed on the system. The e-node supports SDDP and will identify itself on a Control4 system, there should be no need to set the IP address. The e-node can operate with either a dynamic IP address (DHCP) or a static address. The default is dynamic. The e-node communicates with various lighing or motor controllers over an RS485 bus. The bus protocol is configurable to either DMX or CSBus. There is an "User ID" and "Password" setting required to authenticate the TCP connection. Use the Properties view to set the UserID & Password. A separate driver is required for each lighing fixture, or motor controller. This is then linked to the e-node using the "Connections" view. Display Globals DisplayGlobals User STRING false E-NODE MkIII Password STRING false ADMIN Debug Level LIST false 2 - Warning 0 - Alert 1 - Error 2 - Warning 3 - Info 4 - Trace 5 - Debug Debug Mode LIST false Off Off Print Log Print and Log Control4 certified on 3/31/2017 for software released version: 2.9.1