SerialCodeGroup:
To assist in making this device easier to use and the integrated devices (XM Tuner, iPod, NetTuner and HD Radio) easier to find and select, the following devices should be renamed after adding the driver to a project: Tuner2 should be renamed to XM, DVD should be renamed to IPOD, Tuner3 should be renamed to NetTune, Tuner4 should be renamed to HD Radio. By default, Tuner4 will have the standard AM/FM clouds associated; HD AM and HD FM clouds will need to be created manually and bound to the respective HD antenna. (Please note that not all Denon models support all device types mentioned here).For Director versions 1.3.1 and older: Since the integrated devices are actually audio devices but still have onscreen Video functionality, the Control 4 support is limited and may require additional programming steps to assist with system functionality and reduce questions and confusion:In Composer programming, Select the Room that will be used with the onscreen of the receiver. Next, select 'Program Room Events' for 'Audio selection changed'. Then, in Room Actions, select the same Room, select Conditionals, select 'Video device IS selected'. This will be a conditional statement, then in Commands choose 'select a Video device'. Now select the appropriate device to be used.This will allow the system to do a self check and select the appropriate device allowing the onscreen to be used for that device even if the device is selected from the Radio or Music menu on a navigator.

Missing Required Codes - receiver:
BASS_UP, BASS_DOWN, TREBLE_UP, TREBLE_DOWN, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Missing Required Codes - tuner:
NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Missing Required Codes - dvd:
NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Missing Required Codes - tuner:
NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF, TUNE_UP, TUNE_DOWN, PRESET_UP, PRESET_DOWN

Missing Required Macros - receiver:
OUTPUT_MUTE_TOGGLE_X, PULSE_SUR_UP_X

Non-verified Required Macros:
SET_CHANNEL, SET_VOLUME, SET_PRESET_X

Missing Input Macros:
_TUNER, _TUNER, _TUNER, _XMTUNER, _XMTUNER, _DOCK

Non-verified Input Macros:
TUNER, Zone2 Output_TUNER, Zone3 Output_TUNER, XMTUNER, Zone2 Output_XMTUNER, Zone3 Output_XMTUNER, DOCK, Zone2 Output_DOCK, Zone3 Output_DOCK, NET TUNER, Zone2 Output_NET TUNER, Zone3 Output_NET TUNER, AM Antenna, FM Antenna, INPUT CD, Zone2 Output_INPUT CD, Zone3 Output_INPUT CD, INPUT DVD, Zone2 Output_INPUT DVD, Zone3 Output_INPUT DVD, INPUT DVR, Zone2 Output_INPUT DVR, Zone3 Output_INPUT DVR, INPUT HDP, Zone2 Output_INPUT HDP, Zone3 Output_INPUT HDP, INPUT PHONO, Zone2 Output_INPUT PHONO, Zone3 Output_INPUT PHONO, INPUT SAT, Zone2 Output_INPUT SAT, Zone3 Output_INPUT SAT, INPUT TV/CBL, Zone2 Output_INPUT TV/CBL, Zone3 Output_INPUT TV/CBL, INPUT V.AUX, Zone2 Output_INPUT V.AUX, Zone3 Output_INPUT V.AUX, INPUT VCR, Zone2 Output_INPUT VCR, Zone3 Output_INPUT VCR, XM Antenna

Non-verified Inputs:
AM Antenna, FM Antenna, INPUT CD, INPUT DVD, INPUT DVR, INPUT HDP, INPUT PHONO, INPUT SAT, INPUT TV/CBL, INPUT V.AUX, INPUT VCR, XM Antenna

Missing Capabilities:
Toggle Mute Control, Toggle Surround Selection, Toggle Input Selection, Search Up/Down, Toggle Loudness Control, Discrete Loudness Control, Up/Down Balance Control, Discrete Balance Control

Missing Required Codes:
VOLUME_UP, VOLUME_DOWN, MUTE_TOGGLE, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF, MENU, UP, DOWN, LEFT, RIGHT, ENTER

Non-verified Input Macros:
DVD/HD1, DVD/HD2, PC1/RGB1, Video 3, Video 1, Video 2, PC3/RGB3

Non-verified Inputs:
DVD/HD1, DVD/HD2, PC1/RGB1, Video 3, Video 1, Video 2, PC3/RGB3

Missing Capabilities:
Discrete Channel Select, Channel Up/Down, Up/Down Treble Control, Toggle Input Selection, Up/Down Bass Control, Up/Down Balance Control, Toggle Loudness Control, Discrete Mute Control

Certification:
Control4 certified on 6/12/2012 for software released versions: 2.1.1, 2.2.0.

Non-verified Required Macros:
ON, OFF, GO_TO_TRACK

Non-verified Inputs:
Analog In, Digital Input

Power Management:
This driver uses Macro power managenment.

Missing Required Codes:
MUTE_TOGGLE, CHANNEL_UP, CHANNEL_DOWN, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
MENU, UP, DOWN, LEFT, RIGHT, ENTER, VOLUME_UP, VOLUME_DOWN, INPUT_TOGGLE

Missing Required Macros:
SET_CHANNEL

Non-verified Required Macros:
ON, OFF

Non-verified Input Macros:
INPUT VIDEO 4, INPUT VIDEO 3, INPUT VIDEO 2, INPUT VIDEO 1, INPUT RGB 1, INPUT RGB 2

Non-verified Inputs:
INPUT VIDEO 4, INPUT VIDEO 3, INPUT VIDEO 2, INPUT VIDEO 1, INPUT RGB 1, INPUT RGB 2

Power Management:
This driver uses Macro power managenment.

Missing Capabilities:
Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Treble Control, Up/Down Bass Control

Missing Required Macros - receiver:
PULSE_SUR_UP_X

Missing Input Macros:
Zone Out_TUNER, PURE DIRECT, Zone Out_PURE DIRECT, Zone Out_DTV/LD, Zone Out_CD, Zone Out_CD-R, Zone Out_DVD, Zone Out_DVR, Zone Out_Multi Channel Input, Zone Out_PHONO, Zone Out_VCR1, Zone Out_VCR2, Zone Out_CABLE, Zone Out_MD/TAPE, Zone Out_SAT

Non-verified Input Macros:
Multi Channel Input

Non-verified Inputs:
PURE DIRECT, FM Antenna, S400(Audio), AM Antenna

Missing Capabilities:
Discrete Channel Select, Discrete Mute Control, Search Up/Down, Tune Up/Down, Discrete Volume Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Up/Down Balance Control, Discrete Loudness Control, Toggle Loudness Control

Device Capability:
The SET_CHANNEL macro was added to this driver for use with this device's Discrete Tuner Preset functionality.

Certification:
Control4 certified on 2/9/2010 for software released versions: 1.8.2, 2.0.0.

Missing Required Macros:
OUTPUT_VOLUME_UP_X, OUTPUT_VOLUME_DOWN_X, OUTPUT_MUTE_TOGGLE_X, OUTPUT_MUTE_ON_X, OUTPUT_MUTE_OFF_X, PULSE_SUR_UP_X

Non-verified Inputs:
INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5

Power Management:
This driver uses DirectControl power managenment.

Missing Capabilities:
Can Switch, Up/Down Volume Control, Toggle Mute Control, Up/Down Balance Control, Up/Down Bass Control, Discrete Volume Control, Up/Down Treble Control, Toggle Loudness Control, Discrete Mute Control

Missing Required Codes:
TV_VIDEO, NUMBER_5

Missing Input Macros:
TV Antenna, Line In

Non-verified Inputs:
TV Antenna, Line In

Missing Capabilities:
Discrete Input Selection

Certification:
Control4 certified on 8/2/2011 for software released versions: 1.8.2, 2.0.4.

Missing Required Codes:
INPUT_TOGGLE

Non-verified Inputs:
TVAntenna, INPUT 1, INPUT COMPONENT, INPUT 2

Power Management:
This driver uses Macro power managenment.

Missing Capabilities:
Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Certification:
Control4 certified on 4/23/2013 for software released versions: 2.5.0

Certification:
Control4 certified on 10/19/2018 for software released version: 2.10.4

Non-verified Required Macros:
GO_TO_TRACK

Non-verified Inputs:
INPUT IEE1394

IRCodeGroup:
For Models with multi-zone capability - the Zone2 On and Off is a toggle command. The 'RM2 ON/OFF' must be associated to a custom button so that the user can control the Zone2 On/Off state.

Missing Required Codes - receiver:
INPUT_TOGGLE

Missing Required Macros - receiver:
OUTPUT_MUTE_TOGGLE_X, OUTPUT_MUTE_ON_X, OUTPUT_MUTE_OFF_X, PULSE_SUR_UP_X

Missing Input Macros:
External Decoder Input, Zone2 Output_External Decoder Input, Zone2 Output_INPUT PHONO, Zone2 Output_INPUT TAPE 2, Zone2 Output_INPUT VCR 2, Zone2 Output_AM Antenna, Zone2 Output_FM Antenna

Non-verified Inputs:
External Decoder Input, INPUT PHONO, INPUT TAPE 2, INPUT TAPE 1, INPUT VCR 2, INPUT VCR 1, INPUT TV/SAT, INPUT DVD/LD, INPUT CD, AM Antenna, FM Antenna

Missing Capabilities:
Discrete Volume Control, Toggle Loudness Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Discrete Loudness Control, Up/Down Balance Control

Missing Required Codes:
POWER_ON, POWER_OFF, MENU, ENTER

Non-verified Required Codes:
PLAY, STOP, PAUSE, FAST_FWD, FAST_REV, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9, UP, DOWN, LEFT, RIGHT

Non-verified Inputs:
INPUTMIC

Missing Capabilities:
Direct Track Access