IRCodeGroup:
Sony uses a . (period) as a delimeter between major and minor elements of high definition channels; Control4 uses a - (hyphen). When entering channels use a - hyphen, the driver will send the required . (period).

Non-verified Input Macros:
VIDEO 8

Non-verified Inputs:
VIDEO 2, VIDEO 1, VIDEO 3, VIDEO 6, TV ANT, VIDEO 4, VIDEO 5, VIDEO 8, VIDEO 7

Missing Capabilities:
Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Certification:
Control4 certified on 6/2/2020 for software released version: 3.1.3

Non-verified Inputs:
INPUT VIDEO 2, INPUT VIDEO 1, Antenna

Missing Capabilities:
Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Certification:
Control4 certified on 6/25/2010 for software released versions: 1.8.2, 2.0.0.

Certification:
Control4 certified on 9/10/2014 for software released version: 2.5.3

SerialCodeGroup:
POWER OFF command should not be used less than 1 minute after the power is turned on. POWER ON command should not be used less than 1 minute after the power is turned off.

Missing Required Codes:
MENU, UP, DOWN, LEFT, RIGHT, ENTER, MUTE_ON, MUTE_OFF, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF

Missing Required Macros:
SET_VOLUME

Non-verified Input Macros:
DVD/HD1, DVD/HD2, VGA, S-VIDEO, VIDEO1, DVD/HD3, DVI

Non-verified Inputs:
DVD/HD1, DVD/HD2, VGA, S-VIDEO, VIDEO1, DVD/HD3, DVI

Missing Capabilities:
Discrete Channel Select, Up/Down Volume Control, Channel Up/Down, Toggle Mute Control, Up/Down Treble Control, Toggle Input Selection, Up/Down Bass Control, Up/Down Balance Control, Toggle Loudness Control

IRCodeGroup:
This device supports Direct Station Tuning for the XM Band only. To implement simulated Direct Station Tuning for the AM and FM bands, the Bank A (for AM) and Bank B (for FM) commands have been included in the AM and FM Input selection macros. This will enable the user to utilize 8 AM presets and 8 FM presets in the Composer media setup. To accompish this the user can set up 8 AM presets(Bank A) and 8 FM presets (Bank B) in the receiver. Then in the Composer media setup, the station frequencies must be edited. The frequency should be replaced with the corresponding Preset number. For example, if 88.5 FM is setup in Preset 1 in Bank B in the receiver, then the 88.5 frequency should be changed to the number 1 in Composer.

Missing Required Macros - receiver:
OUTPUT_MUTE_ON_X, OUTPUT_MUTE_OFF_X, PULSE_SUR_UP_X

Missing Input Macros:
_TUNER, Zone2 Output_XMTUNER, Zone3 Output_XMTUNER, INPUT IPOD, Zone2 Output_INPUT IPOD, Zone3 Output_INPUT IPOD

Non-verified Input Macros:
XMTUNER

Non-verified Inputs:
AM Antenna, FM Antenna, INPUT CD, INPUT CDR/TAPE, INPUT DVD/VDP, INPUT IPOD, INPUT PHONO, INPUT V.AUX, INPUT VCR, XM Antenna

Missing Capabilities:
Discrete Channel Select, Discrete Surround Selection, Discrete Volume Control, Toggle Surround Selection, Discrete Mute Control, Tune Up/Down, Search Up/Down, Discrete Preset Selection, Discrete Loudness Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Up/Down Balance Control, Toggle Loudness Control, Discrete Bass Control

Missing Required Codes:
TV_VIDEO, NUMBER_5

Missing Input Macros:
TV Antenna, Line In

Non-verified Inputs:
TV Antenna, Line In

Missing Capabilities:
Discrete Input Selection

Certification:
Control4 certified on 7/4/2013 for software released versions: 2.5.0

Non-verified Inputs:
INPUT COMPONENT 1, INPUT HDMI 1, INPUT S-VIDEO, CABLE, INPUT PC, INPUT AV2, INPUT AV1, AIR, INPUT HDMI 2, INPUT COMPONENT 2

Missing Capabilities:
Up/Down Volume Control, Discrete Channel Select, Channel Up/Down, Discrete Input Selection, Toggle Mute Control, Discrete Mute Control, Up/Down Bass Control, Toggle Loudness Control, Up/Down Balance Control, Toggle Input Selection

Certification:
Control4 certified on 2/3/2011 for software released versions: 1.8.2, 2.0.6.