Non-verified Required Codes:
UP, DOWN, LEFT, RIGHT, ENTER

Non-verified Required Macros:
SET_CHANNEL

Non-verified Inputs:
INPUT 1, INPUT 2, INPUT ANTENNA/CABLE

Missing Capabilities:
Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Certification:
Control4 certified on 1/16/2017 for software released version: 2.9.0

Certification:
Control4 certified on 4/23/2013 for software released versions: 2.5.0

Missing Required Codes:
ENTER

Non-verified Required Codes:
POWER_ON, POWER_OFF, MENU, UP, DOWN, LEFT, RIGHT, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Input Macros:
INPUT 5, INPUT 6, INPUT 7, INPUT 4, INPUT 3, INPUT 2, INPUT 1, INPUT 8

Non-verified Inputs:
INPUT 5, INPUT 6, INPUT 7, INPUT 4, INPUT 3, INPUT 2, INPUT 1, INPUT 8

Missing Capabilities:
Channel Up/Down, Up/Down Volume Control, Discrete Channel Select, Toggle Mute Control, Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control, Toggle Input Selection

IRCodeGroup:
The direct "Power ON" code is realized only in the special mode. In that mode, you can control the power directly instead of using the toggle control by using a "Power ON/OFF" toggle code as a "Power ON" direct code. That means there're two choices for the power control,a) In Nomal mode. Power ON/OFF(0xD1C2 as Toggle) & Power PFF(0xD1C0 as Direct) b) In Special mode Power ON(0xD1C2 as Direct, actually it was "Power ON/OFF" in nomal mode) & Power OFF(0xD1C0 as Direct) How to activate the special mode is as below.1.Get into the service menu by pushing ESCAPE, - , UP, +, DOWN , Escape buttons in order while the unit is turned on.2.Set "Require Host ACK" parameter from "0" to "1". (Do not change the other parameters.) 3.Exit the service menu and turn off the unit. (Power off is needed to re-boot the internal CPU) Note: If the unit is in "Special mode", the Power ON/OFF button on the remote does not work to turn it off. (Still the "STANBY/ON" on the panel does work.)

Missing Required Codes:
INPUT_TOGGLE, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF, MENU, UP, DOWN, LEFT, RIGHT, ENTER

Missing Input Macros:
INPUT A, INPUT B

Non-verified Input Macros:
S VIDEO, VIDEO, DVI

Non-verified Inputs:
INPUT A, S VIDEO, VIDEO, DVI, INPUT B

Missing Capabilities:
Channel Up/Down, Up/Down Volume Control, Discrete Channel Select, Toggle Mute Control, Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Missing Required Codes - receiver:
INPUT_TOGGLE

Missing Required Macros - receiver:
PULSE_SUR_UP_X

Non-verified Required Macros:
SET_CHANNEL, SET_PRESET_X

Non-verified Input Macros:
TUNER

Non-verified Inputs:
FM Antenna, INPUT CD, INPUT PHONO, INPUT TAPE 1, INPUT TAPE 2, AM Antenna

Missing Capabilities:
Search Up/Down, Discrete Volume Control, Toggle Loudness Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Discrete Loudness Control, Up/Down Balance Control

Certification:
Control4 certified on 10/19/2018 for software released version: 2.10.4

Missing Input Macros:
HDTV

Non-verified Inputs:
Antenna A, HDTV, Input 1, Input 2, Input 3, Antenna B

Missing Capabilities:
Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Non-verified Required Codes:
PLAY, STOP, PAUSE, FAST_FWD, FAST_REV, RECORD, MENU, UP, DOWN, LEFT, RIGHT, ENTER, INPUT_TOGGLE, TV_VIDEO, CHANNEL_UP, CHANNEL_DOWN, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Macros:
SET_CHANNEL

Missing Input Macros:
Antenna, INPUT LINE 1

Non-verified Inputs:
Antenna, INPUT LINE 1

Power Management:
This driver uses AlwaysOn power managenment.

Missing Capabilities:
Discrete Input Selection

Certification:
Control4 tested on 05/23/2017 for software released versions: 2.9.0