SerialCodeGroup:
Control4 command to X-Arm function mapping: Number1>Memory 1, Number2>Memory2, Number3>Memory3, Number4>Memory4, Enter/Select>Home Move, Up/Down/Left/Right>MoveUp/MoveDown/MoveLeft/MoveRight, Cancel>Stop.

Missing Required Codes:
MENU, NUMBER_0, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF, UP, DOWN, LEFT, RIGHT, ENTER, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4

Missing Capabilities:
Up/Down Volume Control, Discrete Channel Select, Channel Up/Down, Discrete Input Selection, Toggle Mute Control, Discrete Mute Control, Up/Down Bass Control, Toggle Loudness Control, Up/Down Balance Control, Toggle Input Selection

Control Code Mapping:
X-Arm functionality>Control4 command mapping: Home>Select, Tilt Up>Up, Tilt Down>Down, Tilt Left>Left, Tilt Right>Right, Preset1>Number_1, Preset2>Number2, Stop>Stop, Power On>Power On, Power Off, Power Off.

SerialCodeGroup:
Control4 command to X-Arm function mapping: Number1>Memory 1, Number2>Memory2, Enter/Select>Home Move, Up/Down/Left/Right>MoveUp/MoveDown/MoveLeft/MoveRight, Cancel>Stop.

Missing Required Codes:
MENU, NUMBER_0, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF, UP, DOWN, LEFT, RIGHT, ENTER, NUMBER_1, NUMBER_2

Missing Capabilities:
Up/Down Volume Control, Discrete Channel Select, Channel Up/Down, Discrete Input Selection, Toggle Mute Control, Discrete Mute Control, Up/Down Bass Control, Toggle Loudness Control, Up/Down Balance Control, Toggle Input Selection

Device Capability:
By Default, Sharp TVs do not turn on with RS232 commands. The following procedure must be followed to Enable the use of the RS232 Power_On command:1. Connect TV to Control4 Controller with RS232 cable. 2. Manually turn TV power on. 3. Send the "ENABLE POWER_ON"command from Composer. (Enables TV to use ON command)4. Send command "POWER_OFF" from Composer. (TV turn off). 5. Send command "POWER_ON" from Composer. (TV turn on). To reset the Default setting , disabling the use of the RS232 Power_On Command:Send "DISABLE POWER_ON" command from Composer. (Sets "Default" tv cannot be turned with RS232)

Missing Required Codes:
MENU, UP, DOWN, LEFT, RIGHT, ENTER, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
INPUT_TOGGLE, CHANNEL_UP, CHANNEL_DOWN

Non-verified Required Macros:
SET_CHANNEL, SET_VOLUME

Non-verified Input Macros:
Antenna A, INPUT 5, Antenna Digital

Non-verified Inputs:
Antenna A, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, Antenna B, Antenna Digital

Missing Capabilities:
Up/Down Volume Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Device Capability:
By Default, Sharp TVs do not turn on with RS232 commands. The following procedure must be followed to Enable the use of the RS232 Power_On command:1. Connect TV to Control4 Controller with RS232 cable. 2. Manually turn TV power on. 3. Send the "ENABLE POWER_ON"command from Composer. (Enables TV to use ON command)4. Send command "POWER_OFF" from Composer. (TV turn off). 5. Send command "POWER_ON" from Composer. (TV turn on). To reset the Default setting , disabling the use of the RS232 Power_On Command:Send "DISABLE POWER_ON" command from Composer. (Sets "Default" tv cannot be turned with RS232)

Missing Required Codes:
MENU, UP, DOWN, LEFT, RIGHT, ENTER, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
INPUT_TOGGLE, CHANNEL_UP, CHANNEL_DOWN

Non-verified Required Macros:
SET_CHANNEL, SET_VOLUME

Non-verified Input Macros:
Antenna A, INPUT 5, Antenna Digital

Non-verified Inputs:
Antenna A, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, Antenna B, Antenna Digital

Missing Capabilities:
Up/Down Volume Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Device Capability:
By Default, Sharp TVs do not turn on with RS232 commands. The following procedure must be followed to Enable the use of the RS232 Power_On command:1. Connect TV to Control4 Controller with RS232 cable. 2. Manually turn TV power on. 3. Send the "ENABLE POWER_ON"command from Composer. (Enables TV to use ON command)4. Send command "POWER_OFF" from Composer. (TV turn off). 5. Send command "POWER_ON" from Composer. (TV turn on). To reset the Default setting , disabling the use of the RS232 Power_On Command:Send "DISABLE POWER_ON" command from Composer. (Sets "Default" tv cannot be turned with RS232)

Missing Required Codes:
MENU, UP, DOWN, LEFT, RIGHT, ENTER, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
INPUT_TOGGLE, CHANNEL_UP, CHANNEL_DOWN

Non-verified Required Macros:
SET_CHANNEL, SET_VOLUME

Missing Input Macros:
Center Channel Input, Digital Audio Input

Non-verified Input Macros:
Antenna A, INPUT 5, Antenna Digital

Non-verified Inputs:
Antenna A, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, Center Channel Input, Digital Audio Input, Antenna B, Antenna Digital

Missing Capabilities:
Up/Down Volume Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control