SerialCodeGroup:
The C4 Direct Tuning Macro does not support the Mitsubishi syntax.Here is the syntax - Major and sub channel must be written in hexformat.Example: major channel is let's say 330 (decimal)this is 14AH and DATA00~DATA03 should be written like this: 00 00 01 4A.This is the same for the sub channel.If the channel is analog one, then the sub channelfield should be set to FF FE (DATA04~DATA05).Example: for channel 2 (analog) use -DF 80 70 F8 08 02 00 00 00 00 02 FF FEFor channel 11 (analog) use -DF 80 70 F8 08 02 00 00 00 00 0B FF FEFor channel 11-1 (digital) use -DF 80 70 F8 08 02 00 00 00 00 0B 00 01

Missing Required Codes:
MENU, UP, DOWN, LEFT, RIGHT, ENTER, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
VOLUME_UP, VOLUME_DOWN, MUTE_TOGGLE, INPUT_TOGGLE, CHANNEL_UP, CHANNEL_DOWN

Non-verified Input Macros:
Antenna A, Component 1, Component 2, DTV, MonitorLink, VGA, Input 1, Input 2, Antenna B

Non-verified Inputs:
Antenna A, Component 1, Component 2, DTV, MonitorLink, VGA, Input 1, Input 2, Antenna B

Missing Capabilities:
Discrete Channel Select, Discrete Mute Control, Up/Down Bass Control, Toggle Loudness Control, Up/Down Balance Control

Certification:
Control4 certified on 4/4/2013 for software released versions: 2.3

SerialCodeGroup:
This driver contains SET_OUTPUT_VOLUME_X macros for each of the 4 zones (they are set to -22db). The Enable Default Volume feature (in Room Properties) can be used to call these macros in each of the zones. Keep in mind that the ZON volume protocol does not support a VOLUME parameter, so the no matter what volume value is sent to it will always set the volume to the value that is set in the macro (for now that is -22db). Each macro can be edited in the project to set the desired value. The acceptable values are (hex) 41 for -63dB to 5f for +6dB. The default value is 51 for -22dB (i.e. "~F1~R51" $0D for ZAC-A).

Missing Required Codes:
VOLUME_UP, VOLUME_DOWN, MUTE_TOGGLE, MUTE_ON, MUTE_OFF

Missing Required Macros:
PULSE_SUR_UP_X

Non-verified Required Macros:
OUTPUT_VOLUME_UP_X, OUTPUT_VOLUME_DOWN_X, OUTPUT_MUTE_TOGGLE_X, OUTPUT_MUTE_ON_X, OUTPUT_MUTE_OFF_X

Non-verified Input Macros:
ZAC-A_ZIM-1, ZAC-B_ZIM-1, ZAC-C_ZIM-1, ZAC-D_ZIM-1, ZAC-A_ZIM-2, ZAC-B_ZIM-2, ZAC-C_ZIM-2, ZAC-D_ZIM-2, ZAC-A_ZIM-3, ZAC-B_ZIM-3, ZAC-C_ZIM-3, ZAC-D_ZIM-3, ZAC-A_ZIM-4, ZAC-B_ZIM-4, ZAC-C_ZIM-4, ZAC-D_ZIM-4, ZAC-A_ZIM-5, ZAC-B_ZIM-5, ZAC-C_ZIM-5, ZAC-D_ZIM-5, ZAC-A_ZIM-6, ZAC-B_ZIM-6, ZAC-C_ZIM-6, ZAC-D_ZIM-6, ZAC-A_ZIM-7, ZAC-B_ZIM-7, ZAC-C_ZIM-7, ZAC-D_ZIM-7, ZAC-A_ZIM-8, ZAC-B_ZIM-8, ZAC-C_ZIM-8, ZAC-D_ZIM-8, ZAC-A_LOCAL INPUT, ZAC-B_LOCAL INPUT, ZAC-C_LOCAL INPUT, ZAC-D_LOCAL INPUT

Non-verified Inputs:
ZIM-1, ZIM-2, ZIM-3, ZIM-4, ZIM-5, ZIM-6, ZIM-7, ZIM-8, LOCAL INPUT

Missing Capabilities:
Up/Down Treble Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control, Discrete Volume Control

Certification:
Control4 certified on 12/4/2018 for software released version: 2.10.5

Certification:
Control4 certified on 12/4/2018 for software released version: 2.10.5

Certification:
Control4 certified on 6/29/2016 for software released version: 2.8.2

Certification:
Control4 certified on 12/4/2018 for software released version: 2.10.5

SerialCodeGroup:
The Receiver must be in "installer mode" ON in order to wake back up from an OFF command. The receiver will not be listening for any RS-232 calls once turned off without this set properly.

Missing Required Codes - receiver:
VOLUME_UP, VOLUME_DOWN, MUTE_ON, MUTE_OFF

Non-verified Required Codes:
POWER_ON, POWER_OFF, TUNE_UP, TUNE_DOWN, PRESET_UP, PRESET_DOWN, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Missing Required Macros - receiver:
OUTPUT_MUTE_TOGGLE_X, PULSE_SUR_UP_X

Non-verified Required Macros:
SET_CHANNEL, SET_PRESET_X

Missing Input Macros:
Zone2 Output_Phono, Multi Channel Input, Zone2 Output_Multi Channel Input

Non-verified Input Macros:
TUNER, Zone2 Output_TUNER, Video1 Input, Zone2 Output_Video1 Input, Video2 Input, Zone2 Output_Video2 Input, MD/DAT Input, Zone2 Output_MD/DAT Input, CD/SACD Input, Zone2 Output_CD/SACD Input, Phono, DVD Input, Zone2 Output_DVD Input, TV/SAT Input, Zone2 Output_TV/SAT Input, Tape/CD-R Input, Zone2 Output_Tape/CD-R Input, FM Antenna, Video3 Input, Zone2 Output_Video3 Input, AM Antenna, XM Antenna

Non-verified Inputs:
Video1 Input, Video2 Input, MD/DAT Input, CD/SACD Input, Phono, Multi Channel Input, DVD Input, TV/SAT Input, Tape/CD-R Input, FM Antenna, Video3 Input, AM Antenna, XM Antenna

Missing Capabilities:
Toggle Input Selection, Toggle Surround Selection, Search Up/Down, Discrete Volume Control, Toggle Mute Control, Toggle Loudness Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Discrete Loudness Control, Up/Down Balance Control

Certification:
Control4 certified on 3/2/2011 for software released versions: 1.8.2, 2.0.6.

SerialCodeGroup:
The C4 Direct Tuning Macro does not support the Mitsubishi syntax.Here is the syntax - Major and sub channel must be written in hexformat.Example: major channel is let's say 330 (decimal)this is 14AH and DATA00~DATA03 should be written like this: 00 00 01 4A.This is the same for the sub channel.If the channel is analog one, then the sub channelfield should be set to FF FE (DATA04~DATA05).Example: for channel 2 (analog) use -DF 80 70 F8 08 02 00 00 00 00 02 FF FEFor channel 11 (analog) use -DF 80 70 F8 08 02 00 00 00 00 0B FF FEFor channel 11-1 (digital) use -DF 80 70 F8 08 02 00 00 00 00 0B 00 01

Missing Required Codes:
MENU, UP, DOWN, LEFT, RIGHT, ENTER, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
VOLUME_UP, VOLUME_DOWN, MUTE_TOGGLE, INPUT_TOGGLE, CHANNEL_UP, CHANNEL_DOWN

Non-verified Input Macros:
Antenna A, Component 1, Component 2, DTV, MonitorLink, PC, Input 1, Input 2, Input 3, Antenna B

Missing Capabilities:
Discrete Channel Select, Discrete Mute Control, Up/Down Bass Control, Toggle Loudness Control, Up/Down Balance Control