Device Capability:
By Default, Sharp TVs do not turn on with RS232 commands. The following procedure must be followed to Enable the use of the RS232 Power_On command:1. Connect TV to Control4 Controller with RS232 cable. 2. Manually turn TV power on. 3. Send the "ENABLE POWER_ON"command from Composer. (Enables TV to use ON command)4. Send command "POWER_OFF" from Composer. (TV turn off). 5. Send command "POWER_ON" from Composer. (TV turn on). To reset the Default setting , disabling the use of the RS232 Power_On Command:Send "DISABLE POWER_ON" command from Composer. (Sets "Default" tv cannot be turned with RS232)
Missing Required Codes:
MENU, UP, DOWN, LEFT, RIGHT, ENTER, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9
Non-verified Required Codes:
INPUT_TOGGLE, CHANNEL_UP, CHANNEL_DOWN
Non-verified Required Macros:
SET_CHANNEL, SET_VOLUME
Missing Input Macros:
Center Channel Input, Digital Audio Input
Non-verified Input Macros:
Antenna A, INPUT 5, Antenna Digital
Non-verified Inputs:
Antenna A, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, Center Channel Input, Digital Audio Input, Antenna B, Antenna Digital
Missing Capabilities:
Up/Down Volume Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control