Certification:
Control4 certified on 10/1/2010 for software released versions: 1.8.2, 2.0.0.

Non-verified Required Macros:
GO_TO_TRACK

IRCodeGroup:
To assist in making this device easier to use and the integrated devices (XM Tuner, iPod and NetTuner) easier to find and select, the following devices should be renamed after adding the driver to a project: Tuner2 should be re-named to XM, DVD should be re-named to IPOD, Tuner3 should be renamed to NetTune. (Please note that not all Denon models support all device types mentioned here)For Director versions 1.3.1 and older: Since the integrated devices are actually audio devices but still have onscreen Video functionality, the Control 4 support is limited and may require additional programming steps to assist with system functionality and reduce questions and confusion:In Composer programming, Select the Room that will be used with the onscreen of the receiver. Next, select 'Program Room Events' for 'Audio selection changed'. Then, in Room Actions, select the same Room, select Conditionals, select 'Video device IS selected'. This will be a conditional statement, then in Commands choose 'select a Video device'. Now select the appropriate device to be used.This will allow the system to do a self check and select the appropriate device allowing the onscreen to be used for that device even if the device is selected from the Radio or Music menu on a navigator.

Missing Required Macros - receiver:
OUTPUT_MUTE_ON_X, OUTPUT_MUTE_OFF_X, PULSE_SUR_UP_X

Missing Input Macros:
_TUNER, _TUNER, _TUNER, _XMTUNER, _XMTUNER, _DOCK, Zone2 Output_INPUT AUX

Non-verified Input Macros:
XMTUNER, Zone2 Output_XMTUNER, NET TUNER, Zone2 Output_NET TUNER, INPUT DVD/HDP

Non-verified Inputs:
AM Antenna, FM Antenna, INPUT AUX, INPUT CD, INPUT DVD/HDP, INPUT DVR, INPUT PHONO, INPUT TV/CBL, INPUT V.AUX, INPUT VCR, XM Antenna

Missing Capabilities:
Discrete Channel Select, Discrete Volume Control, Discrete Mute Control, Search Up/Down, Up/Down Treble Control, Discrete Bass Control, Discrete Treble Control, Discrete Balance Control, Up/Down Balance Control, Discrete Loudness Control, Toggle Loudness Control, Up/Down Bass Control

Device Capability:
The SET_CHANNEL macro was added to this driver for use with this device's Discrete Tuner Preset functionality.

Certification:
Control4 certified on 3/2/2011 for software released versions: 1.8.2, 2.0.6.

Missing Required Macros - receiver:
OUTPUT_MUTE_ON_X, OUTPUT_MUTE_OFF_X, PULSE_SUR_UP_X

Missing Input Macros:
_TUNER, _TUNER, _TUNER, _XMTUNER, _XMTUNER, _DOCK

Non-verified Input Macros:
XMTUNER, Zone2 Output_XMTUNER, SIRIUSTUNER, Zone2 Output_SIRIUSTUNER, INPUT HDP, SIRIUS Antenna

Non-verified Inputs:
AM Antenna, FM Antenna, INPUT CD, INPUT CDR/TAPE, INPUT DVD, INPUT HDP, INPUT PHONO, INPUT TV/CBL, INPUT V.AUX, INPUT VCR, SIRIUS Antenna, XM Antenna

Missing Capabilities:
Discrete Channel Select, Discrete Mute Control, Search Up/Down, Discrete Volume Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Up/Down Balance Control, Discrete Loudness Control, Toggle Loudness Control

Device Capability:
The SET_CHANNEL macro was added to this driver for use with this device's Discrete Tuner Preset functionality.

Non-verified Required Macros:
GO_TO_TRACK

Certification:
Control4 certified on 6/13/2018 for software released version: 2.10.2

Missing Required Codes - receiver:
INPUT_TOGGLE, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Missing Required Codes - tuner:
NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Missing Required Macros - receiver:
OUTPUT_MUTE_TOGGLE_X, PULSE_SUR_UP_X

Non-verified Required Macros:
SET_PRESET_X

Missing Input Macros:
FM Antenna, AM Antenna

Non-verified Input Macros:
TUNER, INPUT CDR/TAPE

Non-verified Inputs:
FM Antenna, INPUT CDR/TAPE, INPUT CD, INPUT TV/DBS, INPUT VCR, INPUT DVD/VDP, INPUT DVD/DVP, AM Antenna

Missing Capabilities:
Discrete Channel Select, Discrete Mute Control, Search Up/Down, Discrete Volume Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Up/Down Balance Control, Toggle Loudness Control, Discrete Loudness Control

Device Capability:
The SET_CHANNEL macro was added to this driver for use with this device's Discrete Tuner Preset functionality.

Non-verified Required Macros:
GO_TO_TRACK

Non-verified Required Macros:
GO_TO_TRACK

IRCodeGroup:
This device supports Direct Station Tuning for the XM Band only. To implement simulated Direct Station Tuning for the AM and FM bands, the Bank A (for AM) and Bank B (for FM) commands have been included in the AM and FM Input selection macros. This will enable the user to utilize 8 AM presets and 8 FM presets in the Composer media setup. To accompish this the user can set up 8 AM presets(Bank A) and 8 FM presets (Bank B) in the receiver. Then in the Composer media setup, the station frequencies must be edited. The frequency should be replaced with the corresponding Preset number. For example, if 88.5 FM is setup in Preset 1 in Bank B in the receiver, then the 88.5 frequency should be changed to the number 1 in Composer.

Missing Required Macros - receiver:
OUTPUT_MUTE_ON_X, OUTPUT_MUTE_OFF_X, PULSE_SUR_UP_X

Missing Input Macros:
_TUNER, Zone2 Output_XMTUNER, Zone2 Output_INPUT AUX

Non-verified Input Macros:
XMTUNER, INPUT VDP

Non-verified Inputs:
FM Antenna, INPUT CDR/TAPE, INPUT CD, INPUT TV, INPUT PHONO, INPUT VCR2, INPUT VCR1, INPUT DVD, INPUT VDP, INPUT DBS, INPUT V.AUX, XM Antenna, AM Antenna, INPUT AUX

Missing Capabilities:
Search Up/Down, Discrete Volume Control, Discrete Mute Control, Toggle Loudness Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Discrete Loudness Control, Up/Down Balance Control

Non-verified Required Macros:
GO_TO_TRACK

Certification:
Control4 certified on 4/23/2013 for software released versions: 2.5.0

IRCodeGroup:
This device supports Direct Station Tuning for the XM Band only. To implement simulated Direct Station Tuning for the AM and FM bands, the Bank A (for AM) and Bank B (for FM) commands have been included in the AM and FM Input selection macros. This will enable the user to utilize 8 AM presets and 8 FM presets in the Composer media setup. To accompish this the user can set up 8 AM presets(Bank A) and 8 FM presets (Bank B) in the receiver. Then in the Composer media setup, the station frequencies must be edited. The frequency should be replaced with the corresponding Preset number. For example, if 88.5 FM is setup in Preset 1 in Bank B in the receiver, then the 88.5 frequency should be changed to the number 1 in Composer.

Missing Required Macros - receiver:
OUTPUT_MUTE_ON_X, OUTPUT_MUTE_OFF_X, PULSE_SUR_UP_X

Missing Input Macros:
_TUNER, Zone2 Output_XMTUNER, Zone3 Output_XMTUNER

Non-verified Input Macros:
XMTUNER, INPUT VDP

Non-verified Inputs:
AM Antenna, XM Antenna

Missing Capabilities:
Search Up/Down, Discrete Volume Control, Discrete Mute Control, Toggle Loudness Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Discrete Loudness Control, Up/Down Balance Control

Certification:
Control4 certified on 3/2/2011 for software released versions: 1.8.2, 2.0.6.

Non-verified Required Macros:
GO_TO_TRACK, GO_TO_DISC, SET_DISC_X

Release Notes:
Rev_1.1.0.71. Independent zone control for volume and mute are not functional. Pressing the volume keys will result in master volume control only. Workaround: use programming and custom buttons to create individual zone volume up/down and mute on/off buttons by assigning individual codes to the custom buttons.Zones do not turn off when a room is turned off. Workaround: Use programming to emit the appropriate zone off code when a room off command is fired. Direct tuning for the tuner is currently not functional, but going to a specific preset works. Input switching for the tuner (am or fm) is currently inoperative from control control. However, the correct code does get fired when attempting to access a channel through direct tune (even if the channel itself is not fired). Workaround - use the presets for now. The user is currently unable to emit a macro from programming, only serial codes.

Missing Required Codes - receiver:
INPUT_TOGGLE, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Missing Required Codes - tuner:
NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF, TUNE_UP, TUNE_DOWN, PRESET_UP, PRESET_DOWN

Missing Required Macros - receiver:
OUTPUT_MUTE_TOGGLE_X, PULSE_SUR_UP_X

Non-verified Required Macros:
SET_CHANNEL, SET_PRESET_X

Non-verified Input Macros:
TUNER, Zone2 Output_TUNER, Zone3 Output_TUNER, AM Antenna, FM Antenna, INPUT CD, Zone2 Output_INPUT CD, Zone3 Output_INPUT CD, INPUT CDR/TAPE1, Zone2 Output_INPUT CDR/TAPE1, Zone3 Output_INPUT CDR/TAPE1, INPUT DBS/SAT, Zone2 Output_INPUT DBS/SAT, Zone3 Output_INPUT DBS/SAT, INPUT DVD, Zone2 Output_INPUT DVD, Zone3 Output_INPUT DVD, INPUT PHONO, Zone2 Output_INPUT PHONO, Zone3 Output_INPUT PHONO, INPUT TV, Zone2 Output_INPUT TV, Zone3 Output_INPUT TV, INPUT VCR1, Zone2 Output_INPUT VCR1, Zone3 Output_INPUT VCR1, INPUT VCR2, Zone2 Output_INPUT VCR2, Zone3 Output_INPUT VCR2, INPUT VDP, Zone2 Output_INPUT VDP, Zone3 Output_INPUT VDP

Non-verified Inputs:
AM Antenna, FM Antenna

Missing Capabilities:
Toggle Mute Control, Search Up/Down, Discrete Volume Control, Discrete Bass Control, Up/Down Bass Control, Discrete Treble Control, Up/Down Treble Control, Discrete Balance Control, Up/Down Balance Control, Toggle Loudness Control, Discrete Loudness Control

Certification:
Control4 certified on 10/1/2010 for software released versions: 1.8.2, 2.0.0.