Certification:
Control4 certified on 6/29/2016 for software released version: 2.8.2

Certification:
Control4 certified on 1/16/2017 for software released version: 2.9.0

Missing Required Codes:
NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF, MENU, UP, DOWN, LEFT, RIGHT, ENTER

Non-verified Inputs:
COMPONENT, S-VIDEO, VIDEO, HDMI 1, HDMI 2

Missing Capabilities:
Channel Up/Down, Up/Down Volume Control, Discrete Channel Select, Toggle Mute Control, Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control, Toggle Input Selection

Certification:
Control4 certified on 6/29/2016 for software released version: 2.8.2

Missing Required Codes:
MENU, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
UP, DOWN, LEFT, RIGHT, ENTER, INPUT_TOGGLE

Missing Required Macros:
ON, OFF

Missing Input Macros:
USB, INPUT RGB, INPUT AUDIO

Non-verified Input Macros:
INPUT S-VIDEO, INPUT VIDEO

Non-verified Inputs:
USB, INPUT RGB, INPUT S-VIDEO, INPUT VIDEO, INPUT AUDIO

Power Management:
This driver uses Macro power managenment.

Missing Capabilities:
Channel Up/Down, Up/Down Volume Control, Discrete Channel Select, Toggle Mute Control, Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Certification:
Control4 certified on 6/30/2017 for software released version: 2.9.1

Certification:
Control4 certified on 6/29/2016 for software released version: 2.8.2

Certification:
Control4 certified on 6/29/2016 for software released version: 2.8.2

Certification:
Control4 certified on 10/28/2019 for software released version: 3.1.0

IRCodeGroup:
The direct "Power ON" code is realized only in the special mode. In that mode, you can control the power directly instead of using the toggle control by using a "Power ON/OFF" toggle code as a "Power ON" direct code. That means there're two choices for the power control,a) In Nomal mode. Power ON/OFF(0xD1C2 as Toggle) & Power PFF(0xD1C0 as Direct) b) In Special mode Power ON(0xD1C2 as Direct, actually it was "Power ON/OFF" in nomal mode) & Power OFF(0xD1C0 as Direct) How to activate the special mode is as below.1.Get into the service menu by pushing ESCAPE, - , UP, +, DOWN , Escape buttons in order while the unit is turned on.2.Set "Require Host ACK" parameter from "0" to "1". (Do not change the other parameters.) 3.Exit the service menu and turn off the unit. (Power off is needed to re-boot the internal CPU) Note: If the unit is in "Special mode", the Power ON/OFF button on the remote does not work to turn it off. (Still the "STANBY/ON" on the panel does work.)

Missing Required Codes:
INPUT_TOGGLE, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Required Codes:
POWER_ON, POWER_OFF, MENU, UP, DOWN, LEFT, RIGHT, ENTER

Non-verified Input Macros:
INPUT A COMPONENT, INPUT B COMPONENT, S VIDEO, VIDEO, D4, HDMI, INPUT A RGB PC, INPUT A RGB TV, INPUT B RGB PC, INPUT B RGB TV

Non-verified Inputs:
INPUT A COMPONENT, INPUT B COMPONENT, S VIDEO, VIDEO, D4, HDMI, INPUT A RGB PC, INPUT A RGB TV, INPUT B RGB PC, INPUT B RGB TV

Missing Capabilities:
Channel Up/Down, Up/Down Volume Control, Discrete Channel Select, Toggle Mute Control, Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control

Missing Required Codes:
ENTER

Non-verified Required Codes:
POWER_ON, POWER_OFF, MENU, UP, DOWN, LEFT, RIGHT, NUMBER_0, NUMBER_1, NUMBER_2, NUMBER_3, NUMBER_4, NUMBER_5, NUMBER_6, NUMBER_7, NUMBER_8, NUMBER_9

Non-verified Input Macros:
INPUT 1, INPUT 4, INPUT 3, INPUT 2, INPUT 5, INPUT 6, INPUT 7, INPUT 8, INPUT 9, INPUT 10, INPUT 11

Non-verified Inputs:
INPUT 1, INPUT 4, INPUT 3, INPUT 2, INPUT 5, INPUT 6, INPUT 7, INPUT 8, INPUT 9, INPUT 10, INPUT 11

Missing Capabilities:
Channel Up/Down, Up/Down Volume Control, Discrete Channel Select, Toggle Mute Control, Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control, Toggle Input Selection

Certification:
Control4 certified on 6/29/2016 for software released version: 2.8.2

IRCodeGroup:
In order for the C3X to use discrete power commands, the unit must be set up by the user to use either F1 or F2 as the Power_Off command. Assigning the F1 or F2 key is done in the set up menu in the C3X. This driver has F1 mapped as the Power_off command, so the user must assign F1 as the Power_Off command. If the user wished to use F2 as Power_Off then the driver must be edited to reflect this in the Control4 Driver Wizard. Please note that the Power_On command will act as a Power_Toggle until a Power_Off command is assigned.

Non-verified Required Codes:
POWER_ON, POWER_OFF

Non-verified Inputs:
INPUT VIDEO, INPUT S-VIDEO, INPUT COMPONENT/RGBS, INPUT HDMI, INPUT GRAPHICS RGB

Missing Capabilities:
Channel Up/Down, Up/Down Volume Control, Discrete Channel Select, Toggle Mute Control, Discrete Mute Control, Toggle Loudness Control, Up/Down Balance Control, Up/Down Bass Control, Toggle Input Selection

Certification:
Control4 certified on 9/14/2010 for software released versions: 1.8.2, 2.0.0.